Frequently Asked Questions
You can email us at info@pacificblowers.com
PHONE NUMBER
+1 (305) 718-8895
Yes, it can be used for both sucking as well as blowing.
No, the BLOWER’S performance is higher when used for pressure and lower when used for vacuum.
Yes, the blower was developed to be utilized in both 50Hz and 60Hz.
No, usually the performance is 20% lower if it is installed in 50Hz as opposed to 60Hz.
The primary difference between 50 Hz and 60 Hz is that the latest is 20% higher in frequency, which will cause the speed of the induction motor and generator to be higher when compared to 50Hz.
If you are interested in becoming a reseller or distributor, please email us at info@pacificblowers.com and let us know your plans as well as where you would like to represent us.
The warranty covers one year from the purchase date against any manufacturing defects, as stated in the Owner’s Manual on page 13.
Please see pages 2 through 6 of the Owner’s Manual.
It is not recommended, as any dirt particles that enter the blower can damage the impeller, leading to malfunction and voiding the warranty.
Yes, you can install 2 or more BLOWERS in parallel to obtain bigger results so you can meet the needs of your project.
Yes, you can install the blower in different electric voltages according to the diagrams contained on the label inside the electric installation compartment. 50Hz Three-phase (220V ~ 415V) 60Hz Three-phase (230V ~ 480V)
You can install an additional silencer or in some cases an enclosure sound proof (acoustic box) according to your needs.
Please consult page 12 of the Owner’s Manual.
The environment should be the cleanest possible to avoid dirt going inside.
Yes, we can guide you and help find the best model to replace your old BLOWER.
The difference is that single stage only has one impeller, while double stage has two.
We will answer within 48 hours of the request’s receipt.
Yes, we ship nationally and internationally through different methods and shipping prices according to our clients necessities.
IP54 and IP55
IP 54 is a grading usually marked on the products that are to be used in extreme conditions (Outdoor).The IP rating of any product specifies how resistant the device is to foreign objects and moisture. IP stands for Ingress Protection, meaning its ability to stand in extreme weather conditions.
A Totally Enclosed, Fan-Cooled (TEFC) electric motor is a type of industrial motor with an enclosure that does not permit outside air to freely circulate through the interior of it.This means that the motor is dust tight, and has a moderate water seal as well.
The performance was measured at an air temperature of 20ºC and a pressure of 1,013 mbar. The allowable tolerance for the performance value is ±10%. The sound level was measured at a distance of 1.5 meters with fully open inlet and outlet ports.
The blowers can operate for up to 20,000 hours under normal conditions, excluding overload operation. (Ambient conditions: Temperature: -20°C to 40°C, Relative Humidity: up to 80%)
The bearing must be replaced or filled with grease in accordance with the bearing replacement cycle as noted on the Owner’s Manual page 10.